Machine Video:
Pattern diagram：
Finished Product Image:
Products Display :
1.hydraulic decoiler
-Decoiler Type:Hydraulic type
-Loading Capacity:3 Tons
-Coil Inner Diameter:φ450-550mm(Adjustable)
-Coil Outer Diameter:Max. Φ1500mm
-Coil Width:Max.300mm
-Working type:Automatically tensioning type
-Hydraulic motor:3kW
-Function:It is used to support the steel coil uncoil pulled by roll forming system.
2.High speed punching machine with servo feeder
Servo feeder:
-Type:NC system servo feeder
-Servo motor driving
-Power:1.5 kw
-Control system:by PLC
-Feature:high precision,high speed
Servo punching machine:
-Pressure:55 tons
-Power:11kW servo motor
-Mold material:Cr12
-Brand:Self produced by ZTRFM
3.Guide feeding device
-Put the raw material(steel coil)through the guide feeding device
into the main roll forming machine to manufacture and process,it can guarantee that the raw material is centering to the roll forming
machine and the products are neat,parallel and uniformity without scratching.
-It components:Steel plate frame,stainless roller,rubber roller,manual wheel.
4.Main roll forming machine
-Speed:0-35m/min
-Main Forming Motor Power:7.5 kW,380V/50Hz/3Phases
-Machine Frame:Steel plate welded
-Machine Architecture:Iron cast arch Construction
-Roller Shaft:φ50mm Solid Shafts,45#Steel Tempering
-Roller:GCr12 steel Quenched,Surface Hard Chromium Plating
-Roller Station:10 Stations
-Transmission:By Chain
-Motor:Lichao
-Used to form the raw material(steel coil )into beacon channel qualified,precision and stability.
-Roller shaft:φ50mm solid shaft,after machining,lathes,milling
5.Hydraulic system
-Shearing Type:Hydraulic servo tracking punching and shearing,punching device and shearing device are controlled by two servo motors separately.
-Hydraulic Motor:3kW
-Servo motor:1.8kW(shearing device)
-Cutting Blade Material:Cr12
-Length Tolerance:±0.5mm/3m
-With Air Cooling Device
-Automatic punching and shearing controlled by electric control system.It adopts the hydraulic drive and automatic location to decide the dimension and cut the target products.
6. collecting product table
-Table Length:3000mm
-Table Width:1250mm
-Table Material:Square Pipe Welded
-With hydraulic push pump,hydraulic power by hydraulic station
-With conveyor
